Headland Management 2.2.0.0
0/5,
0
voti
Ultimo aggiornamento
ultimo
Versione
2.2.0.0
1 anno fa
V2.2.0.0:
- Support for Mod SpeedControl added
- Support for Mod EnhancedVehicle added
- Configuration enabled for slurry vehicles
- Added option to hide keybinding info in F1 menu
- Support for Mod SpeedControl added
- Support for Mod EnhancedVehicle added
- Configuration enabled for slurry vehicles
- Added option to hide keybinding info in F1 menu
Headland management for tractors, field sprayers, mowers and harvesters.
With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out.
The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-.
It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X.
Included functions:
- Reduce speed (cruise control) and raise again, reactivate cruise control if previously active
- Raise lowered implements and lower them again
- Turn plough, single-stage or two-stage (via centre position)
- Raise and change ridge markers
- Control crab steering
- Disengage and re-engage power take-off(s) and hydraulics
- Beep when headland management is activated
- On/Off switch: Headland Management can be switched on and off. This prevents accidental triggering during transfer to the target field and improves road safety.
- Headland automatic: Activate headland mode automatically when headland is reached. Optional return to field mode after completing the 180° turn.
If VCA Mod (FS22_VehicleControlAddon) is present:
- Deactivate and reactivate GPS track guidance
- Disengage and re-engage active differential locks
- Trigger VCA's turn function, switch turn direction optionally
If Guidance Steering (FS22_guidanceSteering) is present:
- Deactivate and reactivate GPS guidance
Further ideas or wishes are welcome at https://github.com/jason0611/FS22_HeadlandManagement
ChangeLog:
V2.1.0.0:
- Improved timing of the individual work steps
- Improved control of potato harvesters and similar vehicles
- Lifting option added: first front implements, then rear implements
- Headland automatic control now independent of Guidance Steering
- Optional automatic return to field mode after turn
- On/off switch added (lShift+lAlt+X)
- Option to temporary disable headland automatic by key (no key preassigned, could be set arbitrarily in the key settings)
- Revised status display in vehicle HUD
- Vehicle measurement to adapt front/back nodes, if implement is being attached or detached
- Enable manual override of trigger controlled actions
- Save and restore configuration locally for type of implement
- Headland management available in mission vehicles
Credits:
Jason06 / Glowins Modschmiede
With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out.
The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-.
It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X.
Included functions:
- Reduce speed (cruise control) and raise again, reactivate cruise control if previously active
- Raise lowered implements and lower them again
- Turn plough, single-stage or two-stage (via centre position)
- Raise and change ridge markers
- Control crab steering
- Disengage and re-engage power take-off(s) and hydraulics
- Beep when headland management is activated
- On/Off switch: Headland Management can be switched on and off. This prevents accidental triggering during transfer to the target field and improves road safety.
- Headland automatic: Activate headland mode automatically when headland is reached. Optional return to field mode after completing the 180° turn.
If VCA Mod (FS22_VehicleControlAddon) is present:
- Deactivate and reactivate GPS track guidance
- Disengage and re-engage active differential locks
- Trigger VCA's turn function, switch turn direction optionally
If Guidance Steering (FS22_guidanceSteering) is present:
- Deactivate and reactivate GPS guidance
Further ideas or wishes are welcome at https://github.com/jason0611/FS22_HeadlandManagement
ChangeLog:
V2.1.0.0:
- Improved timing of the individual work steps
- Improved control of potato harvesters and similar vehicles
- Lifting option added: first front implements, then rear implements
- Headland automatic control now independent of Guidance Steering
- Optional automatic return to field mode after turn
- On/off switch added (lShift+lAlt+X)
- Option to temporary disable headland automatic by key (no key preassigned, could be set arbitrarily in the key settings)
- Revised status display in vehicle HUD
- Vehicle measurement to adapt front/back nodes, if implement is being attached or detached
- Enable manual override of trigger controlled actions
- Save and restore configuration locally for type of implement
- Headland management available in mission vehicles
Credits:
Jason06 / Glowins Modschmiede
Scarica i file dell'ultima versione
Versione: 2.2.0.0Aggiornato: 1 anno fa
Dimensione totale: 0 B FS22_HeadlandManagement.zip external scaricare · aggiunto 1 anno fa
Ti potrebbe anche piacere »
0 Commenti
Non ci sono commenti. Sii il primo a commentare!